Quote: info@myronstone.com Phone: 905-696-8010
Financing available on approved credit
Mon-Fri: 9am - 6pm. Sat: 11am - 4pm

Cements Grout

Choosing the right cement and grout can be very important when getting your installation completed. Different cements and grout serve different purposes, hence depending on your requirements, we suggest different kinds. Please check our faqs page here for more details on which cement suits you best.

The following are some of the items we keep in stock at all times.


Cements

Mapei Ultraflex™ 1

Standard grade cement used for regular tile installations. Can be used for both interior and exterior applications.

Ultraflex 1 is a standard-grade, single-component, polymer-modified thin-set mortar for most interior and exterior installations of tile. This mortar has an above average content of unique dry polymer, resulting in good adhesion to the substrate and tile. Ultraflex 1 can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Ultraflex 1 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.

Technical Data Sheet (English (Usa)

Mapei Ultraflex™ 2

Premium grade cement used for regular tile installations. Can be used for both interior and exterior applications.

Ultraflex 2 is a professional-grade, single-component, high-performance, polymer-modified thin-set mortar for interior and exterior installations of ceramic, porcelain and dimensional natural-stone tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex 2 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. Ultraflex 2 can be used for interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors.

Technical Data Sheet (English (Usa)

Mapei Kerabond™

Premium grade cement used for all regular tiles interior and exterior application. 

Kerabond is a premium-grade dry-set mortar for use in most interior, exterior, residential and light commercial floor and wall applications. This premium dry-set mortar is part of the Kerabond/Keralastic™ high-performance mortar system.

Technical Data Sheet (English (Usa)

Mapie Ultraflex™ LFT™

Medium grade cement, used mostly for large format tiles.
Tiles that exceed 24×24 in size generally require the use of this cement. 

Ultraflex LFT is a premium, nonsag, large-and-heavy-tile mortar (formerly known as “medium-bed mortar”) and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology™ for ease of application.

Technical Data Sheet (English (Usa)

MAPEI Ultralite™ Mortar

Premium grade cement used for larger tiles and other uses that require a strong cement. 

MAPEI Ultralite Mortar is a premium-grade, lightweight, single-component thin-set mortar that can also be used for large-and-heavy tile (formerly known as “mediumbed”)and non-sag applications. This high-performance, polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application, and with BioBlock® technology for mold and mildew resistance. MAPEI Ultralite Mortar’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and may contribute to LEED points with more than 20% recycled content.

Technical Data Sheet (English (Usa)


Grout

Keisel Grout

This is very high-quality grout that comes in a choice of 23 colors, to match any tile or mosaic you choose. Keisel grouts has many features including water and stain resistant, rapid cure (dries in 6 hours), pre-sealed and can be used for interior, exterior and underwater purposes. Please find further information on this product here:

Flexible, water and dirt-repellent grout

  • Universal formula for walls and floors
  • high mechanical durability and abrasion resistance
  • for interior, exterior and submerged applications
  • crack and shrink resistant
  • mold and mildew resistant
  • colour accurate and efflorescence free
  • for 1-10 mm joint widths
  • increased resistance to acids and alkaline solutions
  • high resistance to household cleaning agents
  • water and dirt repellent (hydrophobic)
  • doesn’t require sealer
  • safe usage at low temperatures
  • suitable for floor heating
  • for absorbent coverings
  • open to light traffic after 6 hours
  • residential and commercial application

Processing

Check the suitability of the surface and also the surface manufacturer’s instructions. To ensure the uniform colour of the joint, use only material from one batch. Before starting washing, grout must be almost entirely dry, and the joints clean and uniform in depth.

With clean, cold water, mix Servoperl Royal to a smooth, paste-like consistency to a uniform colour. Let the mixture rest for 3-5 minutes (slake time) before mixing once again to ensure a smooth and workable consistency. Remove any foreign material and spacers from the grout joint. Fill in the joints firstly transversely and then diagonally, completely filling them. If the mixture begins to become more difficult to spread, simply mix again to attain proper consistency. avoid adding any water. As soon as the joints start to dry, wipe with a sponge, using as little water as possible.

Sufficient strength has been achieved when the grout can be slightly depressed with a fingernail. Also using a sponge, remove any extra grout traces/film still remaining within an hour. Do not dust off while in a wet state. Any leftover material which has already thickened must not be re-mixed. Avoid direct sun and draughts dur-ing the setting process. It is recommended that freshly grouted outdoor areas, or non-absorbent coating ma-terials, be covered with a plastic poly and kept damp where necessary.

Note: Servoperl Royal may scratch soft polished marble, glass or metal tile. Follow tile manufacture/ fabrica-tor recommendations or test a small area prior to use to determine suitability.

Specifications

Color

white, silver grey, light grey, manhattan, medium grey,shadow,slate, anthracite, bali brown,light brown,desert sand, mochacino,sahara, safari sand,topaz, pergamon, jasmine,green, blue, red, creamy yellow

Application

interior, exterior and submerged** areas

Joint widths

1-10 mm / 1/32″-3/8″

Application temperature

+5°C to +25°C (substructure) 41F-77F

Temperature tolerance

-20°C to +80°C / -4F-176F

Water demand

approx. 0.9 litres / 5 kg powder / 0.23US gal per 11 Lbs

Processing time*

approx. 60-70 minutes

Ready for traffic*

after approx. 6 hours

Slake time

3:5 minutes

GISCODE

ZP 1 – low in chromate according to TRGS 613

Storage

Store under dry conditions, can be stored for approx. 12 months

*

At +20°C and 65 % rel. humidity.
Higher temperatures shorten and lower temperatures lengthen these values accordingly.

**

contact Kiesel technical department for further information

Important notices

To avoid staining, please observe the following:

Low temperatures delay the setting process of the mixture, which can lead to discolouration. As a result of humidity from the substructure, efflorescence and staining can occur. Subsequent treatment of the set joint by scrubbing and cleaning with extremely diluted, acidic cleaning agents has proven to be effective. Water should be applied to the joint beforehand. On walls, work from top to bottom, and on floors, puddles should be avoided. Servoperl royal is a cement-based product and is therefore not absolutely resistant to aggressive cleaning agents and to water with high chlorine content.

Coverage

Approx. 0.35 kg/m² for 15 cm x 15 cm tiles
Approx. 0.50 kg/m² for 10 cm x 10 cm mosaic
approx. 1.00 kg/m² for 5 cm x 5 cm mosaic

Approximate Coverage table per 11 lbs. bag

Tile SizeJoint Widht
1/16″

(1.5 mm)

1/8″

(3 mm)

1/4″

(6mm)

3/8″

(9 mm)

1″x1″x3/16″4824128
1″x1″x1/4″361896
2″x2″x1/4″72361812
4″x4″x5/16″114572919
4″x4″x1/2″72361812
4″x8″x1/2″96482416
6″x6″x1/4″2141075436
6″x6″x1/2″108542718
8″x8″x5/16″2281145738
8″x8″x1/2″142713624
10″x10″x5/16″2841427148
12″x12″x3/8″2851437148
12″x12″x5/16″3431718657
12″x24″x5/16″45522811464
16″x16″x5/16″45522711476
18″x18″x5/16″51525612886
24″x24″x5/16″685343171114
24″x48″x3/8″760380190127

Cleaning

Immediately clean tools with water after use.

Packaging

PackagingItem no.EAN
50 Units 4 x 5 kg Special paper bag80130 white4015705801308
50 Units 4 x 5 kg Special paper bag80131 silver grey4015705801315
50 Units 4 x 5 kg Special paper bag80132 light grey4015705801322
50 Units 4 x 5 kg Special paper bag80133 medium grey4015705801339
50 Units 4 x 5 kg Special paper bag80134 pergamon4015705801346
50 Units 4 x 5 kg Special paper bag80135 sahara4015705801353
50 Units 4 x 5 kg Special paper bag80146 anthracite4015705801469
50 Units 4 x 5 kg Special paper bag80140 shadow4015705801407
50 Units 4 x 5 kg Special paper bag80137 desert sand4015705801377
50 Units 4 x 5 kg Special paper bag80138 safari sand4015705801384
50 Units 4 x 5 kg Special paper bag80139 mochacino4015705801391
50 Units 4 x 5 kg Special paper bag14613 jasmine4015705146133
50 Units 4 x 5 kg Special paper bag80148 topaz4015705801483
50 Units 4 x 5 kg Special paper bag80143 manhattan4015705801438
50 Units 4 x 5 kg Special paper bag14616 creamy yellow4015705146164
50 Units 4 x 5 kg Special paper bag14617 red4015705146171
50 Units 4 x 5 kg Special paper bag14619 green4015705146195
50 Units 4 x 5 kg Special paper bag14618 blue4015705146188
50 Units 4 x 5 kg Special paper bag80141 bali brown4015705801414
50 Units 4 x 5 kg Special paper bag80142 light brown4015705801421

Technical Data Sheet (English (Usa)

We have access to many more kinds of grouts and cement, but those are based on special requirements you may have.

Please contact us for other information you might require